Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- 85 mm x 150 mm x 36 mm ISO 2217K self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 50,8 mm x 101,6 mm x 20,6375 mm RHP NLJ2 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 65 mm x 140 mm x 48 mm NTN 2313S self aligning ball bearings
- Medium Duty
- Setscrew Ball Bearing
- Toyana 1311K+H311 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 45 mm x 100 mm x 36 mm NKE 2309-K+H2309 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 50 mm x 75 mm x 35 mm ISB GE 50 BBL self aligning ball bearings
- Intermediate Duty
- Setscrew Ball Bearing
- 25 mm x 62 mm x 17 mm SKF 1305EKTN9 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 20 mm x 52 mm x 15 mm NSK 1304 K self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 75,000 mm x 130,000 mm x 25,000 mm SNR 1215 self aligning ball bearings
- 215 Series
- Expansion
- 100 mm x 180 mm x 46 mm NTN 2220SK self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 100 mm x 215 mm x 73 mm FAG 2320-M self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 65,000 mm x 140,000 mm x 48,000 mm SNR 2313K self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing